1. 機台尺寸 : 460 x 410 x 340 mm
2. 端子夾具適合多種尺寸端子
3. 切割/研磨輪轉速可調 0 ~ 4000 rpm
4. 具手輪方便移動，依位置自動開關馬達
5. 高亮度LED光源輔助照明
6. 電源AC 110V / 220V ， 最大功率 375 W

端子剖面分析儀及軟體

1. 二百萬畫素USB 介面數位攝影機
2. 底板 380 x 260 x 25mm， 總高度 340mm，高度可調 ~ 250mm，移動工作台行程 60 mm
3. 光學倍率 (目鏡 0.5x 物鏡 0.7x ~ 4.5x )
4. 視野範圍 : 最大19.6 x 14.8mm / 最小2.5 x 1.9mm
5. LED光源(含霧化板)， 自帶條光器， 輸入AC 90 ~ 240V， 最大輸出功率3.5W
6. 可調式XY移動平台 (左右75 / 前後 50mm )

分析軟體操作者介面

[基本功能]

1. 可輸入客戶名稱、端子型號、模具編號、材料厚度、拉力測試
2. 最多可接受四種規格線材,線徑可支援mm或AWG
3. 可輸入公司基本資料及公司代表圖示

[分析工具]
專業分析項目，支援線束芯數計算(SC)、外框設定自動圖像轉正並計算端子寬度(CW)和高度(CH)、內框設定自動計算面積、壓縮率、空洞率、毛邊寬度(GW)、毛邊高度(GH)、支撐角(W) 側翼非對稱性(A)、側翼末端距離(R)、底材厚度(SB)

[量測記錄]
提供多種量測工具，包括點、線長、平行線距離、角度、矩形面積及長寬、圓形半徑及面積、旋轉畫面、箭頭及文字等功能

[尺規校正]
提供預校功能並允許自行校正光學倍率

[影像比對]
提可載入兩張影像覆疊比較差異

[報表輸出]

1. 可單圖或雙圖輸出，第二張圖可任意指定
2. 分析項目可選擇性輸出並以顏色表示結果

Saw and Grinding Machine

1. Machine : 460 x 410 x 340 mm
2. Terminal fixture suitable for various sizes of terminals.
3. Saw / Grinding wheel speed adjustable 0 ~ 4000 rpm.
4. With hand wheel easy to move , according location auto switch motor on/off.
5. High brightness LED light source auxilary lighting.
6. Power AC 110V / 220V , Max. power 375W

Crimp Cross Section Analysis Equipment and Software

1. 2 Mega pixel USB camera ( 1600 x 1200 pixel )
2. Platform 380 x 260 x 25mm , Total Height 340mm, adjustable height~250mm , up/down travel 60mm
3. Optical magnification ( Eyepiece 0.5x Objective lens 0.7x ~ 4.5x )
4. Field of view : Max. 19.6 x 14.8mm / Min. 2.5 x 1.9mm
5. LED lighting ( include diffuser ) with regulator , Input AC 90 ~ 240V , Output Max. 3.5W
6. Adjustable XY Table ( Horizontal 75 / Vertical 50mm )

Analysis Software User Interface

[Basic Function]

1. System can input bssic information include customer name, terminal type, mold number material thickness, pull test.
2. Up to four wire gauge, wire diameter support mm or AWG.
3. System can enter the company’s basic information and LOGO.

[Analysis Tools]
Professional analysis items, support wire strand count (SC), outline setting then auto rotation and compute terminal width (GW) / height (GH), inner setting and auto area compression rate / void rate computing, burr width (GW) and height (GH), support angle (W) support angle (W), flank asymmetry (A), flank end distance (R), bottom thickness (SB)

[Measure Record]
Provide a variety of measurement tools, including point, length, parallel line distance, angle, rectangular area and length / width, circular radius and area, rotating screen, arrow and text.

[Ruler Calibration]
Provide pre-calibration parameter and allow calibration optical magnification by customer.

[Image Compare]
System enable to load two images overlap and compare.

[Report Export]

1. Report support single or two images , the second image allow assign any images.
2. Analysis items can be selectively Output , and the results indicated by colors.

〈FE-100A 端子沖壓剖面分析系統<p> Crimp Cross Section Analysis System</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。

1. Can test and measure all kinds of modular plug terminal depth.
2. Precision reach to 0.01mm.
3. Simple and quick operation.

〈FE-8502 金片深度測試儀<p> Modular Plug Terminal Depth Gauge</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。

1. Manual push-pull with ball bearing action. Compact size, easy operation, suitable for assembling and inspection room.
2. Clamp wire can left/right adjust in line, increase testing precision.
3. Meter is made in Japan, high reliability, option for 3~50 kgs.

〈FE-HT30 手搖式推拉計<p> Manual Push-Pull Counter</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。

1. It is designed with automatic and stepping move mode control, and speed can be adjust.
2. It returns to the original position upon completion of automatic test.
3. Compact configuration with powerful strength ensure the accurate and stable, easy to operate.
4. Machine type FE-50W-E complete with digital force gauge series optional 50 Kgs or 100 Kgs.

〈FE-T50W/T50W-E 自動推拉力測試機<p> Electrical Tension Tester</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。