1. Specially apply to crimp loose terminal.
2. Entirely noiseless operation.
3. Minimum loss during operation.
4. Taking a small space, easily relocate.
5. It takes merely three minutes to replace the moulds.

選配組 OPTIONAL SET

〈FE-8508 單粒端子壓著機<p> Loose Terminal Crimping Machine</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。

1. Capable of pressing general PC heads and British style PC heads, as well as electronic assembling.
2. Entirely noiseless operation.
3. Minimum loss during operation.
4. Taking a small space, easily relocate.
5. It takes merely three minutes to replace the moulds.

〈FE-8501L PC頭打頭機 (小金剛) <p>Modular Plug Auto-Termination Machine</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。

1. Machine design for crimping loose shape terminal four-side and easy to operate.
2. Terminal range si from OD ø3.5 to ø10.
3. Change guiding hole base according terminal OD.
4. Adjustable crimping pressure, stable quality and full pull force. Suitable for high frequency write and prevent temperature raised.
5. Controlled by air and oil pressure, adjust pressure 5 ~ 8 kg/ cm² which depends on the material, and easy to operate.

〈FE-CR1M-AO空壓增壓圓管四爪鉚合機<p>Loose Tube Shape Terminal Crimping Machine</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。

1. This machine specially apply to crimping loose tube shape terminal four-side.
2. Easy to change terminal guiding hole according to terminal outer diameter.
3. Easy to adjust crimping depth stable quality.
4. Controlled by air and electricity, air pressure 5~7 kgs, easy to operate and safe.

〈FE-CR1M-A氣動單粒圓管端子四面鉚合<p>Air Loose Tube Shape Terminal Crimping Machine</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。

M4S & M4E (AJM) Applicator accessories

M5S Applicator accessories

JST Applicator accessories

OSAWA Applicator accessories

〈FE-2TC多功能端子機 (適用各廠牌 卡式模配置圖) <p>Multi-function Crimping Machine ( arrangement drawing for all kinds of applicator)</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。

1. Machine fit by inverter motor, silent, save energy & eliminate maintenance.
2. Fit with FE-M4E End type applicator, auto stripping and crimping.
3. Only need to change some parts to use FE-M4S side type applicator.
4. By using air absorb, stripping, clamping, crimping , blade back at one process, delay time adjustable base on wire diameter and material, to reach stable stripping process and products quality.
5. With “Auto” & “Step” mode for adjust requirement.

〈FE-2TCS-E直線剝打機<p>Terminal Stripping & Crimping Machine For End Type Applicator</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。

1. Machine fit by inverter motor, silent, save energy & eliminate maintenance.
2. Install air absorb, clamp, strip, back at one process. According to wire situation to adjust blade delay time, stripping stable to reach products quality.
3. Chip suction/blower time can be adjusted to facilitate the next actions.
4. With “Auto” & “Step” mode for adjust requirement.

〈FE-2TCS連續剝皮打端機<p>Semi-Automatic Stripping & Crimping Machine</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。

1. This machine is driven by servo motor, quiet, low vibration, high stability, sufficient output, reducing the trouble of traditional mechanical parts and power consumption.
2. The crimping hight of the terminal is electrical adjusted or manually adjusted to avoid loss of the rivet due to poor mold adjustment.
3. Applicable to different type of terminals, the pressing speed can be adjusted in multi stages.
   Adjustable knob is easy to adjust on the panel.
4. Suitable for each brand applicator in side type or end type.
5. Optional auto/manual crimp height adjustment for easy adjust the crimping height.

〈FE-5TS伺服強力型半自動端子機<p>Semi-Automatic Terminal Crimping Machine-Servo Type/Motor (5Tons)</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。

1. This machine is driven by servo motor, quiet, low vibration, high stability, sufficient output, reducing the trouble of traditional mechanical parts and power consumption.
2. The crimping hight of the terminal is electrical adjusted or manually adjusted to avoid loss of the rivet due to poor mold adjustment.
3. Applicable to different type of terminals, the pressing speed can be adjusted in multi stages.
   Adjustable knob is easy to adjust on the panel.
4. Suitable for each brand applicator in side type or end type.
5. Optional auto/manual crimp height adjustment for easy adjust the crimping height.

〈FE-2.5TS伺服半自動連續端子壓著機<p>Semi-Automatic Crimping Machine-Servo Motor</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。

1. The Inverter motor is adopted in this machine for operation.
2. Main body constructed by CNC, strong, few parts, less vibration, accurate, durable usage and easy for maintenance. Option servo motor, and new design device for manual height adjustment or automatic height adjustment mechanism.
3. This machine does not have parts like clutch, solenoid or any other traditional parts that makes noise. Thus, it provides a noiseless working environment for the operator.
4. By changing the baseplate and applicator connector, side or end-type applicators from different brand can be used. This machine can be used in a wide range of applicators, it can also fit with our full automatic machines.

〈FE-2TC半自動連續端子壓著機<p>Semi-Automatic Terminal Crimping Machine (2.0 Ton)</p>〉這篇文章最早發佈於《汎益行有限公司 Foung-E Co., Ltd.》。